• BANNER QS RANKING1

  • thumbnail_Karnival945x300.jpg

  • Pelantikan_Profesor-banner.jpg

  • Archi Offshore

hanizam
bbb
Hanizam Awang (Assoc. Prof. Dr.)

E49 / 115,
School of HBP
USM 11800 Penang, Malaysia
Tel : 604-6532815
Email : hanizam@usm.my

PROFILE

Academic Qualifications  
  • Bachelor of Civil Engineering, Universiti Teknologi Malaysia, 1994
  • Master of Science in Environmental Engineering, University of Newcastle upon-Tyne,1997
  • Doctor of Philosophy (PhD), Civil and Structural Engineering, Universiti Kebangsaan Malaysia, 2008
     
Professional Membership    
     
Personal Details
bbb
Dr Hanizam joins USM's School of Housing, Building and Planning on 16 April 2001 as a lecturer in Building Technology programme.  She obtained her first degree from Universiti Teknologi Malaysia in Civil Engineering, Masters Degree from Newcastle University and Ph.D  (Civil and Structural Engineering) from Universiti Kebangsaan Malaysia.  She has some years of working experience with several civil & structural consultant, and contractor firms before joining Universiti Sains Malaysia.

Her main areas of interest are building construction/material and composite structure.
     

RESEARCH

RESEARCH GRANT

 National

  1. Soft Costs Model and Influences on Green Construction Projects, (1/12/2014-30/11/2016), Skim Geran Penyelidikan Fundamental (FRGS), Researchers : Prof. Madya Dr. Nazirah Zainul Abidin, Profesor Madya Dr. Nor’Aini Yusof, Dr. Hanizam Awang, Prof. Madya Sr. Azlan Raofuddin Haji Nuruddin
  2. Understanding the behaviour of Industrialised building System(IBS) panel connection using finite element model, Skim Geran Penyelidikan Fundamental (FRGS), (1/12/2014-30/11/2016), Researchers: Dr. Mariati Taib, Dr. Hanizam Awang, Dr. Norizal Noordin.
  3. Exploring Pro-Environment Practices in Malaysian Construction Industry: What Gets Implemented and Where? (1/6/2013-31/5/2015), Skim Geran Penyelidikan Eksploratori (ERGS), Researchers: Profesor Madya Dr. Nor’Aini Yusof, Prof. Madya Dr. Nazirah Zainul Abidin,  Dr. Hanizam Awang, Dr. Atasya Osmadi.
  4. Fundamental Approach Of Predicting Insulation And Structural Response Of Foamed Concrete Panel For Fire Resistance, FRGS, Ministry of Higher Education, July 2012-june 2014. Researchers: Sr. Dr. Md. Azree Othuman Mydin, Dr. Hanizam Awang (Completed)
  5. Green Construction: Developer’s Expectation, Experience and Future Action, ERGS, Ministry of Higher Education, 15 Aug 2011 – 14 August 2013. Researchers: Dr Nazirah Zainul Abidin (PL), Assoc. Prof. Dr Nor’Aini Yusof, Dr Hanizam Awang, Dr Hasnanywati Hassan, (Completed).

 

University

  1. Potential of Incorporating Oil Palm Ash Waste into Foam concrete: Towards Green Construction (1/12/2013-30/11/ 2015). Researchers: Dr Hanizam Awang, Sr. Dr. Md. Azree Othuman Mydin.
  2. Effect of Fibre on Properties of Lightweight Foamed Concrete ( April 2011- 31Mac 2013). USM short-term grant. Researchers: Dr Hanizam Awang, Dr Norizal Noordin, (Completed).
  3. The use of lightweight infill material for profiled stell sheet dry board floor system (1 April 2010 – 31 Mac 2012). USM RU individu. Researchers: Dr. Hanizam Awang, Dr. Norizal Noordin, Assoc. Prof. Dr. Mohd Rodzi Ismail, Sr. Dr. Md. Azree Othuman Mydin, (Completed).
  4. The behaviour of shear connection in profiled steel sheet dry board (PSSDB) systems, (1 April 2009-31 Mac 2011) USM short-term grant. Researchers: Dr Hanizam Awang, Assoc. Prof. Dr. Taksiah A. Majid, (Completed).
  5. The Effectiveness of Environmental Impact Assessment (EIA) Report in Malaysia (A case study in Penang)”, IRPA short-term grant, 2004. Researcher: Dr. Hanizam Awang, (Completed).
  6. The Robustness of Steel Connections at Ambient and Elevated Temperatures, 1/9/2014-3/8/2016, USM (USM-Short term), Researchers: Dr. Mariati Taib, Dr. Hanizam Awang.
  7. Fire Insulation Performance of Foamed Concrete Panel System,  USM Short Term Grant, 15/8//2011 – 14/8/2013. Researchers: Sr Dr. Md Azree Othuman Mydin, Dr. Hanizam Awang, (Completed)
  8. The effect of Aqueous Derived Foam Protein and Synthetic Foaming agents on the Compressive Strength and Shrinkage of Foamed Concrete”, USM short-term grant, 2005. Researchers: Dr. Noorizal Nordin, Dr. Hanizam Awang, (Completed)
  9. Campus Master Plan: USM Grant. Researchers:  Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (Completed)

 

 

1. The Use Of The Lightweight Infill Material For Profiled Steel Sheet Dry Board Floor System (PSSDB)

2. The Behaviour Of Shear Connection In Profiled Steel Sheet Dry Board (PSSDB) Systems

SUPERVISION

Graduated


Master by Research

  1. Md Nor bin Atan (2014), The Engineering Properties of Self-Compacting Concrete Incorporating Raw Rice husk Ash, MSc Thesis, USM.
  2. Ahmad Farhan Roslan (2014), Properties of Foamed Concrete Intergrating Various Additives and  Its Applications as Infill Material, MSc Thesis, USM.
  3. Muhammad Hafiz Ahmad (2015), Fiber lightweight Foamed Concrete, MSc Thesis, USM.

 

On Going

PhD

  1. Mohammad Zuhear Abdulameer (PhD), Utilisation of Oil palm  Ash in lightweight foamed concrete
  2. Zaid Shaker Mahmood (PhD), Lightweight foamed concrete partition
  3. Siti Nur Fazillah Mohd Fauzi (PhD). Environment sustainability practices among engineering firms in the construction industry

 

Master by research

  1. Shankar A/L Ganesan (MSc) Fundamental Approach Of Predicting Insulation And Structural Response Of Foamed Concrete Panel For Fire Resistance

 

Master Coursework

  1. Ammar W. Abbood (2014), Achieving Energy Efficiency Through Industrialised Building System for the Iraqi Houses
  2. Nur Bahiyah binti Shukuri (2014), A Study on the Abandoned Heritage Building in George Town, Penang.
  3. Ng Phei Li (2013) The effect of flow table test and density difference of foamed concrete
  4. Sara Soleiman Zadeh (2012), Mechanical properties of coir fibre reinforced high strength concrete.
  5. Nurhafizah Mohd Ezani (2012), The effect of kenaf fibre on properties of concrete.
  6. Rionov Bayouta (2011),The effect of admixture of lightweight foamed concrete
  7. Mohd Azraei Harun (2011), The Performance of Maintenance system in Universiti Sains Malaysia.
  8. Nur Ramziyah Muhamad Halil (2010), Technology tranafer in industrialised building system (IBS), MSc Building Technology, USM
  9. Mohd Najib Abd Rashid (2010). A review on mining land reclamation as a construction project activities: Focusing on housing schemes in city of Ipoh, Perak Darul Ridzuan
  10. Azira bt Ibrahim, (2010) The Authenticity of roof construction in corservation projects.
  11. Masturah Ibrahim (2010) The application of modular coordination precast concrete core slab in construction industry.
  12. Loke Chin Wei (2010) Comparison between high-percentage replacement of cement with RHA & PFA
  13. Junaidah Jailani (2009) The effectiveness of the Centralized Management Maintenance System (CMMS) as a solution for an effective maintenance and monitoring technique. Case study: Bangunan Pentadbiran Kerajaan Persekutuan Parcel E, Putrajaya. MSc Building Technology.
  14. Suhaila Ali (2009) Perception of highway users towards the management of traffic safety equipment in the maintenance of Plus Highway works, MSc Building Technology.
  15. Ashraf Farag Nouh Ali (2009) Evaluating study to estimating the cracks in building, MSc Building Technology
  16. Muhammad Hazizie bin Mohd Zain (2005), Kesan pembangunan ke atas pencemaran air sungai Kelantan, MSc in Building Technology, USM.
  17. Mohamad Rizal bin Zainon (2005), Kajian ke atas sistem pelupusan sampah “ sanitary landfill” dan impaknya ke atas persekitaran, kajian kes: Tapak Pelupusan Ampang Jajar, Seberang Perai, Pulau Pinang, MSc in Building Technology, USM.
  18. Aymen Ahmad Mohmed Aklan( 2004), Accommodating Campus Building Services for Architectural Aesthetics, MSc in Building Technology, USM.
  19. Zainol Md. Radzi (2003),Ciri-ciri Kekuatan Mampatan dan Pengecutan Konkrit Ringan Berbusa Protein dan Sintetik, MSc in Building Technology, USM.

 

Undergraduate Supervision

  1. Kavetha Mohan (2014), Lightweight Foamed Concrete with Palm Oil Fuel Ash (POFA)
  2. Chua Boon Sin  (2014), Appraisal of Fire Risk Management on Water Stilt School Buildings: Case Study of Kampung Pulau Ketam
  3. Intan Mulianie Mohamad Kamil  (2014), The Implementation of OSHA 1994 in Malaysian Construction Industry: Contractors Point of View
  4. Siti Hajar Molah  (2014), Evaluation of Road Maintenance Management System: Case study at Public Work Department of Northeast District, Penang
  5. Siti Norninashakhila Yashrri (2013), SWOT analysis on the implementation of IBS in Malaysia
  6. Fazilah Razak (2013), IBS  risk in construction projects in Malaysia from contractors point of view.
  7. Low Cheau Ming (2012), Defect analysis of different types of walling system for building

 

 

 

 

 

 

PUBLICATION

Technical Report

  1. Lee Lik  Meng, Nurwati Badarulzaman, Hanizam Awang, Lim Yoke Mui, , Tiun Ling Ta (eds) 2002,   The University in A Garden: Policies and Guidelines, USM, Penang.
  2. Lee Yoke Mui, Lee Lik Meng, Aldrin Abdullah, Hanizam Awang, Nurwati Badarulzaman, 2003, The Participation Process- Planning the USM Main Campus.

 

Books

  1. Lee Lik Meng. Lee Yoke Mui, Muna Hanim Abdul Samad, Hanizam Awang, Mohd. Wira Mohd Shafiei, Azizi Bahaudin, Tiun Ling Ta, Nurwati Badarulzaman, Badaruddin Mohamed, Aldrin Abdullah, 2003, The University in a Garden, Pejabat Penerbit Universiti Sains Malaysia, 176 pages.ISBN.983-2514-50-9
  2. Lee Lik Meng. Lee Yoke Mui, Muna Hanim Abdul Samad, Hanizam Awang, Azizi Bahaudin, Nurwati Badarulzaman, Badaruddin Mohamed, Aldrin Abdullah, 2004, The University in a Garden, Special Edition, Pejabat Penerbit Universiti Sains Malaysia, 183 pages , ISBN:983-2514-81-9
  3. Ahmad Sanusi Hassan, Abdul Majid Ismail, Wan Mariah Wan Harun, Hanizam Awang et al , (2004), Rekabentuk Seni Bina,  Portfolio Tahun 2004, Penerbit Pusat Pengajian PBP,  100 pages, ISBN:983-41749-0-X.

 

Chapter in a Book

  1. Hanizam Awang and Abd. Naser Abd. Ghani , (2015), Earthworks and Excavation, Chapter  in Construction Methods and Technology, Edited by Hanizam Awang and Md. Azree Othuman Mydin,   USM Publishing, 44 pages.(Accepted-editing stage)
  2. Hanizam Awang (2015), Concrete Formwork Excavation, Chapter  in Construction Methods and Technology, Edited by Hanizam Awang and Md. Azree Othuman Mydin,  USM Publishing, 22 pages (Accepted-editing stage)

 

Journal

  1. Mohammed Al-mulali, Hanizam Awang, H,P.S Khalil, Zaid Aljoumaily, (2015), The incorporation of oil palm ash in concrete as a mean of recycling: A review, Journal of Cement and Composites, 55, 129-138. (IF: 2.76)
  2. Hanizam Awang, Muhammad Hafiz Ahmad, Mohammed Al-mulali, (2015), Influence of Kenaf and Polypropylene Fibres on Mechanical and Durability Properties of Fibre Reinforced Lightweight Foamed Concrete, Journal of Engineering Science and Technology, 10(5), 89-102. (Indexed by Scopus)
  3. Hanizam Awang, Mohammed Al-mulali, Zaid Aljoumaily (2015), Strength of Sieved Only Oil Palm Ash Foamed Concrete, International Journal of Engineering and Technology, (Indexed by Scopus), ISSN : 1793-8236  (Accepted)
  4. Hanizam Awang, Md Nor Atan,  Nazirah Zainul Abidin, Nor”Aini Yusof (2015), A cost –reduction of self-compacting concrete incorporating Raw rice husk ash, Journal of Engineering Science and Technology . (Indexed by Scopus)–Accepted
  5. Mohammed Al-mulali, Hanizam Awang,  Zaid Aljoumaily (2015), Properties of Unground OPA Foamed Concrete, Applied Mechanics and Material (Indexed by Scopus) ISSN: 1662-7482 (Accepted)
  6. Siti Nur Fazillah Mohd Fauzi, Nor’Aini Yusof, Hanizam Awang (2015), Antecedent to Environmental Sustainability Practices in the Engineering Profession,  Applied Mechanics and Material (Indexed by Scopus) ISSN: 1662-7482 (Accepted)
  7. Nor’Aini Yusof, Mohammad iranmanesh, Hanizam Awang (2015), Pro-Environment Practices among Malaysian Construction Practitioners, Applied Mechanics and Material (Indexed by Scopus) ISSN: 1662-7482 (Accepted)
  8. Hanizam Awang, Mohammed Al-mulali, H,P.S Khalil, Zaid Aljoumaily (2014), Utilisation of Oil Palm Ash in Foamed Concrete, MATEC Web of Conferences, 15, 01033. (Indexed by Scopus)
  9. Hanizam Awang, Zaid Aljoumaily, Norizal Noordin, Mohammed Al-mulali (2014), The Mechanical Properties of Foamed concrete Containing un-processed Blast Furnace Slag, MATEC Web of Conferences, 15, 01034. (Indexed by Scopus)
  10. Hanizam Awang, Intan Mulianie Mohamad Kamil, (2014), Execution of the Occupational Safety and Health Act (1994) in the Construction Industry from Contractors’ Point of View, SHS Web of Conferences, 11, 01003. (Indexed by Scopus)
  11. Nur Bahiyah Mohd Shukuri, Hanizam Awang (2014), Study of Abandoned Heritage Buildings from the Owners’ Perspectives in Goerge Town, Penang, MATEC Web of Conferences, 17, 01009. Thompson Reuters
  12. Awang, H. and Ahmad, M.H. (2014). Durability Properties of Foamed Concrete with Fiber Inclusion. International Journal of Civil, Architectural Science and Engineering, 8(3), 32 - 35.
  13. F. Md. Razak, H. Awang (2014),The Contractors’ Perception of the Implementation of Industrialised Building System (IBS) in Malaysia, MATEC Web of Conferences, Vol. 10, 04003, (Indexed by Scopus)
  14. S.N. Yashrri, A. Hanizam (2014), Safety Assessment in Installation of Precast Concrete, MATEC Web of Conferences, Vol . 10, 06001, (Indexed by Scopus)
  15. Hanizam Awang, Md. Azree Othuman Mydin, Muhammad Hafiz Ahmad (2013), Mechanical and Durability Properties of Fibre Lightweight Foamed Concrete, Australian Journal of Basic and Applied Sciences, Vol.7,14-21, Indexed by Elsevier: SCOPUS www.scopus.com and Thomson Reuters.
  16. Ahmad Farhan Roslan, Hanizam Awang , Md Azree Othuman Mydin, (2013), Effects of Various Additives on Drying Shrinkage, Compressive Strength and Flexural Strength of Lightweight Foamed Concrete, Advanced Materials Research Journal, Vol. 626, pp 594-604. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  17. Muhammad Hafiz Ahmad and Hanizam Awang (2013),Effect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed Concrete, Advanced Materials Research Journal, Vol. 626, pp 404-410, Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  18. Nor’Aini Yusof, Siti Nur Fazillah Mohd Fauzi, Nazirah Zainul Abidin, Hanizam Awang (2013), Journal of Education and Practice, Vol 4(4), 23-29. IC Impact factor value 7.15
  19. Hanizam Awang, Md Azree Othuman Mydin, Ahmad Farhan Roslan (2012) Effect of Additives on Mechanical and Thermal Properties of Lightweight Foamed Concrete. Advances in Applied Science Research Journal, 3(5), pp 3326-3338.
  20. Md Azree Othuman Mydin, Mahyuddin Ramli, Hanizam Awang,(2012) Factors of Deterioration in Building and the Principles of Repair, Analele Universităţii Eftimie Murgu journal, Eftimie Murgu University of Resita, Romania, Volume 19, Issue 1,  pp. 347-354 (ISSN: 1453-7397)
  21. Hanizam  Awang, Md Azree Othuman Mydin  and Ahmad Farhan Roslan (2012), Microstructural investigation of lightweight foamed concrete incorporating various additives, International Journal of Academic Research , Vol.4 (2), pp 196-200.
  22. N. Zainul Abidin, N. Yusof, H. Awang (2012), A foresight into green housing industry in Malaysia, World Academy of Science, Engineering and Technology (Waset) (67), pp 440-448.
  23. Hanizam Awang, Md Azree Othuman Mydin  and Ahmad Farhan (2012). Effect of fibre on drying shrinkage, compressive strength and flexural strength of lightweight foamed concrete, Advanced Materials Research Journal, Vol 587, pp 144-150. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  24. Zaid Shaker Aljoumaily, Norizal Noordin, Hanizam Awang and Mohammed Zuhear Almulali, (2012), The Effect of Blast Furnace Slag on Foam concrete in terms of Compressive strength, Advanced Materials Research Journal, Vol 587, pp 81-87. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  25. Md Azree Othuman Mydin, Hanizam Awang and  Ahmad Farhan Roslan  (2012), Determination of lightweight foamed concrete thermal properties integrating various additives. Elixir Cement & Con. Com. 48, pp 9286-9291. ICV 5.09. (Indexed by Scopus).
  26. Hanizam Awang, Muhammad Hafiz Ahmad (2012), The Effect of Steel Fibre Inclusion on the Mechanical Properties and Durability of Lightweight Foam Concrete. Elixir Adv. Eng.Info. 48, pp 9348-9351, Publisher: Elsevier, (Indexed by Scopus)
  27. Awang, H. and Wan Badaruzzaman, W.H. (2011). Development of profiled steel sheeting dry board system in school classroom modules. Journal of Civil Engineering and Construction Technologies, Vol. 2(4), pp.72-81.
  28. Atan, M.N, Awang, H. (2011),The compressive and flexural strengths of self-compacting concrete using rice husk ash. Journal of Engineering Science and Technology (JESTEC), Vol 6 (6), pp 720-732. (Indexed by SCOPUS)
  29. Atan, M.N, Awang, H. (2011),The mechanical properties of self-compacting concrete incorporating raw rice husk ash. European Journal of Scientific Research, Vol. 60(1), pp 166-176,  (Indexed by SCOPUS)
  30. Awang, H. and Wan Badaruzzaman, W.H. (2010). Structural performance and application of a reversed profiled steel sheeting dry board (PSSDB) roof panel system, Asian Journal of Civil Engineering. Vol.11, No. 3, pp 371-384, Indexed by Elsevier: (Indexed by Scopus)
  31. Awang, H. and Wan Badaruzzaman, W.H. (2009). The bending behavior of a reversed profiled steel sheet dry board (PSSDB) panel for application in a roofing system. Journal of Construction in Developing Countries, Vol.14, No. 2, pp 21- 36, Indexed by Elsevier: (Indexed by Scopus)

 

 ISI Proceedings

  1. Nor’aini Yusof, Siti Nur Fazillah Mohd Fauzi, Nazirah Zainul Abidin, Hanizam Awang (2013), Employers’ Evaluations on Student Performance in Industrial Training: A Case of Built Environment Students in a Public University in Malaysia, 1st International Conference on Engineering and Technology Education, pp 152-157. Indexed by ISI
  2. N. Zainul Abidin, N. Yusof, H. Awang (2012), A foresight into green housing industry in Malaysia, World Academy of Science, Engineering and Technology (Waset) (67), pp 440-448. Index by Scopus.
  3. Wan Badaruzzaman, W.H., Nordin, N., Hamid, M.F. and Awang, H. (2009). Prediction of the Behaviour of Profiled Steel Sheeting Dry Board through the finite Element. 9th. International Conference on Steel Concrete Composite and Hybrid Structures, 555-560. Indexed by ISI
  4. Noordin, M.N. and Awang, H. (2005). Lightweight foamed concrete in construction, In Proceeding of International Conference of Construction and Real Estate Management (ICCREM), P.R. china: China Architecture & Building Press. P. 1488-1491. ISBN 7-112-07871-7. Indexed by ISI
  5. Ismail, M.R., Ahmad, A.R. & Awang, H. (2003). Structural defects and solutions: A case study of Fort Cornwallis, Penang, Malaysia, In Proceeding of Eighth International Conference on Structural Studies, Repairs and Maintenance Heritage Architecture, pg 349-357. Indexed by ISI

 

National Journal

  1. Awang, H. and Wan Badaruzzaman, W.H. (2010). Finite element prediction on the flexural performance of individual panel of profiled steel sheeting dry board (PSSDB) roof system, Malaysian Construction Research Journal. Vol./No.1, pp 1-12

 

Proceedings (International)

  1. Mohammed Al-mulali, Hanizam Awang,  Zaid Aljoumaily (2014), Properties of unground OPA foamed concrete. Postgraduate Conference in Built Environment, Penang.
  2. Hanizam Awang, Mohammed Z. Al-Mulali, Zaid Shaker Aljoumaily (2014) Utilization of Oil Palm Ash in Foamed Concrete, Accepted to be presented in International Conference on Civil, Construction and Geological Engineering, Instanbul.
  3. Hanizam Awang, Zaid Shaker Aljoumaily , Norizal Noordin, Mohammed Z. Al-Mulali, (2013), The Mechanical properties of foamed concrete containing un-processed blast furnace slag, 3rd International Building Control Conference, Kuala Lumpur
  4. Hanizam Awang, Mohammed Z. Al-Mulali, H.P.S. Abdul Khalil, Zaid Shaker Aljoumaily, (2013), Utilisation of oil palm ash in foamed concrete, 3rd International Building Control Conference, Kuala Lumpur
  5. Siti Fazillah Mohd Fauzi, NorAini Yusof, Hanizam Awang (2013), Engineers and Environmental Sustainability Practice, International Conference on Business Innovation, Entrepreneurship and Engineering 2013
  6. Hanizam Awang, Md Azree Othuman Mydin  and Ahmad Farhan (2012). Effect of fibre on drying shrinkage, compressive strength and flexural strength of lightweight foamed concrete, International Conference on Civil Engineering & Materials 2012.
  7. Zaid Shaker Aljoumaily, Norizal Noordin, Hanizam Awang and Mohammed Zuhear Almulali, (2012), The Effect of Blast Furnace Slag on Foam concrete in terms of Compressive strength, International Conference on Civil Engineering & Materials 2012.
  8. Md Azree Othuman Mydin and Hanizam Awang (2011), A review on mechanical and thermal properties of lightweight foamed concrete at ambient temperature, Proceeding of International Building and Infrastructure Technology, Penang, pp 400-407.
  9. Hanizam Awang and Md Azree Othuman Mydin, (2011), Properties of gypsum platerboard at elevated temperature, Proceeding of International Building and Infrastructure Technology,  Penang, pp 425-431.
  10. Md Nor Atan and Hanizam Awang, (2011), Investigating the strength of self compacting concrete incorporating low and moderate volume cement replacement using raw rice husk ash, Proceeding of International Building and Infrastructure Technology,  Penang,. Pp 432-439
  11. Ahmad Farhan Roslan, Hanizam Awang and Md. Azree Othuman Mydin (2011), Engineering properties of foamed concrete with different additives as partial cement and sand replacement. Proceeding of 5th. International Conference on Built Environment in Developing Countries 2011, pp 521-530.
  12. Awang, H. and  Abdul Majid, T. (2010). Connector stiffness of profiled steel sheet dry board (PSSDB) system. Proceeding of American Society of Civil Engineering (ASCE) 6th. International Engineering & Construction Conference (IECC’6), pp. 72-79.
  13. Awang, H., Noordin, M.N., Ismail, M.R., Hussein Al-Haidary, M.H.M (2010) Properties of Hardened foam concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 1013-1021.
  14. Atan, M.N, Awang, H. (2010),The compressive and flexural strengths of self-compacting concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 876-885.
  15. Mohamad Jais, M.H.S, Awang, H. (2010) The effects of mineral additives on the strength of fibre foamed concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 955-963.
  16. Md. Nor Atan, Hanizam Awang (2010), Influence of powder fractions on the properties of self-compacting concrete, Proceeding of World Engineering Congress 2010
  17. Md. Hasif Shafiq Mohamad Jais, Hanizam Awang (2010), The effects of mineral additives in fiber foamed concrete, Proceeding of World Engineering Congress 2010.
  18. Nordin, N., Wan Badaruzzaman, W.H. and Awang, H., (2009). Connector stiffness of ‘peva-cemboard’ screwed connection in profiled steel sheet dry board (PSSDB) panel. Fifth International Conference on Construction in the 21st Century (CITC-V), Turkey.  ISBN:1-884342-02-3, pp 1476-1482
  19. Wan Badaruzzaman, W.H., Awang, H., and Nordin, N., (2009). Development of a new composite flooring system based on improved profiled steel sheet dry board (PSSDB) system. Fifth International Conference on Construction in the 21st Century (CITC-V), Turkey. ISBN:1-884342-02-3, pp1563-1570
  20. Awang, H., Nordin, N., Wan Badaruzzaman, W.H., (2009). Development of a new composite rooring panel based on profiled steel sheet dry board system. International Symposium on Construction in Developing Economies: Commonalities Among Diversities, Penang. ISBN:978-967-5417-34-4. Pp 210-217
  21. Nordin, N., Wan Badaruzzaman, W.H., Awang, H. (2009). Performance of Profiled Steel Sheet Dry Board Flooring System with Timber Strips. International Symposium on Construction in Developing Economies: Commonalities Among Diversities, Penang. ISBN:978-967-5417-34-4. pp 394-401.
  22. Awang, H, Wan Badaruzzaman, W.H. and Nordin, N., (2009). The Application of Profiled Steel Sheeting Dry Board (PSSDB) Industrialised Building System. 7th. Asia Pasific Structural Engineering and Construction Conference 2009 (APSEC 2009).
  23. Awang, H., Nordin, N. and Wan Badaruzzaman, W.H. (2008). Complete application of profiled steel sheet dry board system as classroom modules. 2nd. International Conference on Built Environment in Developing Country, Penang, pp 432-443
  24. Awang, H. and Wan Badaruzzaman, W.H. (2008). Behaviour of individual panel of profiled steel sheet dry board roof system CAFEO, Bangkok.
  25. Awang, H. and Wan Badaruzzaman, W.H. (2007). Development of profiled steel sheet dry board (PSSDB) roofing system, In Proceeding of International Conference on Built Environment in Developing Country, Penang, pp 484-493
  26. Wan Badaruzzaman, W.H., Awang, H., and Ahmed, E. (2006). Development of folded plate profiled steel sheet dry board (PSSDB) roofing system, Proceeding of 6th Asia Pasific Structural Engineering and Construction Conference (APSEC), Kuala Lumpur.
  27. Noordin, M.N., Awang, H. and Abdul Ghani, A.N.A., (2006). Practical application of portable foam generator and lightweight foamed concrete in housing development, In Proceeding of The International Conference on Sustainable Housing, Penang: USM. ISBN 983-41749-1-8, pp 223-230
  28. Awang, H. Ahmad, A.G. and Ismail, M.R. (2003). Do we need to teach Construction History? Experiences of the School of Housing, Building and Planning, Universiti Sains Malaysia, Penang, In Proceeding of the First International Congress on Construction History, Madrid. ISBN 84-9728-072-5- pp 291-298
  29. Awang, H. & Noordin, N. (2002).  Effect  of Alkaline-Resistant Glass Fibre on Compressive Strength of Lightweight Foamed Concrete, In Proceeding of the 27th Conference on Our Would in Concrete and Structures, Singapore, page 225-230. ISBN 981-04-5825-8.
  30. Awang, H. & Noordin, N. (2002). Lightweight Foamed Concrete Containing Alkaline-Resistant Glass Fibre,  In Proceeding of the 6th International Conference on Concrete Technology for Developing Countries, Jordan, 21 - 23 October.
  31. Mohd Fadzil Mohd Idris and Hanizam Awang (2002), Performance Based For Smoke Detectors On Pitch And Flat Roof, Proceedings of the 2nd World Engineering Congress, Kuching, pp. 377-383.

 

Teaching Modules

  1. Managing People in Construction Industry (2012), Module prepared for Construction Industry and Development Board (CIDB) Training
  2. Concrete work management (2012), Module prepared for Construction Industry and Development Board (CIDB) Training
  3. Building works Supervision (2012), Module prepared for Construction Industry and Development Board (CIDB) Training

 

Report

  1. Lee Lik  Meng, Nurwati Badarulzaman, Hanizam Awang, Lim Yoke Mui, , Tiun Ling Ta (2002),   The University in A Garden: Policies and Guidelines, USM, Penang.
  2. Lee Lik Meng, Lee Yoke Mui, Aldrin Abdullah, Hanizam Awang, Nurwati Badarulzaman, (2003), The Participation Process- Planning the USM Main Campus.
  3. Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2002), Proposed Landscape & Pedestrianization: Sungai Dua Entrance.
  4. Aldrin Abdullah, Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2002), Universiti Sains Malaysia: The Walkable Campus Plan
  5. Aldrin Abdullah, Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2003), Universiti Sains Malaysia: The Walkable Campus Plan

 

 

 

Architectural Science Review December 2003
Building and Environment June 2004

OTHERS

Working Experience

  • Industrial training with HSS Integrated Sdn. Bhd., Damansara Utama, as a designer. (1993)
  • Design engineer with Jurutera Perunding Sdn. Bhd., Kota Bharu. (1994)
  • Site engineer with Sykt. Sulaiman Daud Sdn. Bhd., Kota Bharu. (1994-1996)
  • Part-time lecturer with Adorna Institute of Technology (1999)
  • Project manager with PTSB Sdn.Bhd, Penang (July 1999-April 2001)
  • Lecturer, School of Housing, Building and Planning, Universiti Sains Malaysia, April 2001-present