Pusat Pengajian Perumahan, Bangunan & Perancangan  |  School of Housing, Building and Planning    USM White

Hanizam Awang

{backbutton}

DSC 0188 1
bbb
Hanizam Awang (Assoc. Prof. Dr.)

E49 Pejabat Timb Dekan/ E08B -006
School of HBP
USM 11800 Penang, Malaysia
Tel : 604-6533174/3279
Email : hanizam@usm.my

PROFILE

Academic Qualifications  
  • Bachelor of Civil Engineering, Universiti Teknologi Malaysia, 1994
  • Master of Science in Environmental Engineering, University of Newcastle upon-Tyne,1997
  • Doctor of Philosophy (PhD), Civil and Structural Engineering, Universiti Kebangsaan Malaysia, 2008
     

 

Professional Membership

   
  • Graduate member; Board of Engineers, Malaysia (Membership no: 36573A)
  • Graduate member; The Institution of Engineers, Malaysia (Membership no: G76038)
  • Corporate member of Concrete Society of Malaysia (SCM) (Membership No. M0412)
  • Senior member of Asian-Pasific Chemical, Biological and Environmental Engineering Society (APCBEES)(Membership no: 101124)
     
Personal Details
bbb
Dr Hanizam joins USM's School of Housing, Building and Planning on 16 April 2001 as a lecturer in Building Technology programme.  She obtained her first degree from Universiti Teknologi Malaysia in Civil Engineering, Masters Degree from Newcastle University and Ph.D  (Civil and Structural Engineering) from Universiti Kebangsaan Malaysia.  She has some years of working experience with several civil & structural consultant, and contractor firms before joining Universiti Sains Malaysia.

Her main areas of interest are building construction/material and composite structure.
     

RESEARCH

RESEARCH GRANT

 National

  1. Engineering Characterization of Lightweight Aggregate Containing Silt from water Treatment Plant, Skim Geran Penyelidikan Fundamental (FRGS), (15 August 2017 – 14 August 2020), Researchers: Assoc. Prof. Dr. Hanizam Awang (USM), Assoc. Prof. Dr. hasmaliza Mohamad (USM), Dr. Khairunisa Muthusamy (UMP).
  2. Soft Costs Model and Influences on Green Construction Projects, (1/12/2014-30/11/2016), Skim Geran Penyelidikan Fundamental (FRGS), Researchers : Prof. Madya Dr. Nazirah Zainul Abidin, Profesor Madya Dr. Nor’Aini Yusof, Dr. Hanizam Awang, Prof. Madya Sr. Azlan Raofuddin Haji Nuruddin
  3. Understanding the behaviour of Industrialised building System(IBS) panel connection using finite element model, Skim Geran Penyelidikan Fundamental (FRGS), (1/12/2014-30/11/2016), Researchers: Dr. Mariati Taib, Dr. Hanizam Awang, Dr. Norizal Noordin.
  4. Exploring Pro-Environment Practices in Malaysian Construction Industry: What Gets Implemented and Where? (1/6/2013-31/5/2015), Skim Geran Penyelidikan Eksploratori (ERGS), Researchers: Profesor Madya Dr. Nor’Aini Yusof, Prof. Madya Dr. Nazirah Zainul Abidin,  Dr. Hanizam Awang, Dr. Atasya Osmadi.
  5. Fundamental Approach Of Predicting Insulation And Structural Response Of Foamed Concrete Panel For Fire Resistance, FRGS, Ministry of Higher Education, July 2012-june 2014. Researchers: Sr. Dr. Md. Azree Othuman Mydin, Dr. Hanizam Awang (Completed)
  6. Green Construction: Developer’s Expectation, Experience and Future Action, ERGS, Ministry of Higher Education, 15 Aug 2011 – 14 August 2013. Researchers: Dr Nazirah Zainul Abidin (PL), Assoc. Prof. Dr Nor’Aini Yusof, Dr Hanizam Awang, Dr Hasnanywati Hassan, (Completed).

 

University

  1. Preliminary Investigation to Determine Phyical, Mechanical and Thermal Properties of BtechLite Block as Innovative Green Materials (1 Mac 2016-28 February 2019). Researchers: Dr Hanizam Awang, Dr. Noor Faisal Abas.
  2. Potential of Incorporating Oil Palm Ash Waste into Foam concrete: Towards Green Construction (1/12/2013-30/11/ 2015). Researchers: Dr Hanizam Awang, Sr. Dr. Md. Azree Othuman Mydin.
  3. Effect of Fibre on Properties of Lightweight Foamed Concrete ( April 2011- 31Mac 2013). USM short-term grant. Researchers: Dr Hanizam Awang, Dr Norizal Noordin, (Completed).
  4. The use of lightweight infill material for profiled stell sheet dry board floor system (1 April 2010 – 31 Mac 2012). USM RU individu. Researchers: Dr. Hanizam Awang, Dr. Norizal Noordin, Assoc. Prof. Dr. Mohd Rodzi Ismail, Sr. Dr. Md. Azree Othuman Mydin, (Completed).
  5. The behaviour of shear connection in profiled steel sheet dry board (PSSDB) systems, (1 April 2009-31 Mac 2011) USM short-term grant. Researchers: Dr Hanizam Awang, Assoc. Prof. Dr. Taksiah A. Majid, (Completed).
  6. The Effectiveness of Environmental Impact Assessment (EIA) Report in Malaysia (A case study in Penang)”, IRPA short-term grant, 2004. Researcher: Dr. Hanizam Awang, (Completed).
  7. The Robustness of Steel Connections at Ambient and Elevated Temperatures, 1/9/2014-3/8/2016, USM (USM-Short term), Researchers: Dr. Mariati Taib, Dr. Hanizam Awang.
  8. Fire Insulation Performance of Foamed Concrete Panel System,  USM Short Term Grant, 15/8//2011 – 14/8/2013. Researchers: Sr Dr. Md Azree Othuman Mydin, Dr. Hanizam Awang, (Completed)
  9. The effect of Aqueous Derived Foam Protein and Synthetic Foaming agents on the Compressive Strength and Shrinkage of Foamed Concrete”, USM short-term grant, 2005. Researchers: Dr. Noorizal Nordin, Dr. Hanizam Awang, (Completed)
  10. Campus Master Plan: USM Grant. Researchers:  Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (Completed)

 

1. The Use Of The Lightweight Infill Material For Profiled Steel Sheet Dry Board Floor System (PSSDB)

2. The Behaviour Of Shear Connection In Profiled Steel Sheet Dry Board (PSSDB) Systems

SUPERVISION

Graduated

PhD
1. Mohammad Zuhear Abdulameer (2015), Properties of Foamed Concrete with Oil Palm ash Inclusion and Its Application as an Interlocking Mortarless Block
2. Zaid Shaker Mahmood (2016), Lightweight foamed concrete partition
 

Master by Research

  1. Md Nor bin Atan (2014), The Engineering Properties of Self-Compacting Concrete Incorporating Raw Rice husk Ash, MSc Thesis, USM.
  2. Ahmad Farhan Roslan (2014), Properties of Foamed Concrete Intergrating Various Additives and  Its Applications as Infill Material, MSc Thesis, USM.
  3. Muhammad Hafiz Ahmad (2015), Fiber lightweight Foamed Concrete, MSc Thesis, USM.
  4. Shankar A/L Ganesan (2015), Fundamental Approach Of Predicting Insulation And Structural Response Of Foamed Concrete Panel For Fire Resistance, USM
Master by Mixmode
 
1. Kamel Anarmarzi Sanaz (2018), Mechanical And Physical Properties Of Roller Compacted Concrete Pavement With Natural Fibres

On Going

PhD

  1. Siti Nur Fazillah Mohd Fauzi. Environment sustainability practices among engineering firms in the construction industry
  2. Wenny Armida. Thermal performance of lightweight foamed concrete
  3. Kwek Shi Ying, Study On The Artificial Aggregate Production From Water Treatment Sludge And Industry By Product .

 Master by research

  1. Shankar A/L Ganesan (MSc) Fundamental Approach Of Predicting Insulation And Structural Response Of Foamed Concrete Panel For Fire Resistance

Master Coursework

  1. Ammar W. Abbood (2014), Achieving Energy Efficiency Through Industrialised Building System for the Iraqi Houses
  2. Nur Bahiyah binti Shukuri (2014), A Study on the Abandoned Heritage Building in George Town, Penang.
  3. Ng Phei Li (2013) The effect of flow table test and density difference of foamed concrete
  4. Sara Soleiman Zadeh (2012), Mechanical properties of coir fibre reinforced high strength concrete.
  5. Nurhafizah Mohd Ezani (2012), The effect of kenaf fibre on properties of concrete.
  6. Rionov Bayouta (2011),The effect of admixture of lightweight foamed concrete
  7. Mohd Azraei Harun (2011), The Performance of Maintenance system in Universiti Sains Malaysia.
  8. Nur Ramziyah Muhamad Halil (2010), Technology tranafer in industrialised building system (IBS), MSc Building Technology, USM
  9. Mohd Najib Abd Rashid (2010). A review on mining land reclamation as a construction project activities: Focusing on housing schemes in city of Ipoh, Perak Darul Ridzuan
  10. Azira bt Ibrahim, (2010) The Authenticity of roof construction in corservation projects.
  11. Masturah Ibrahim (2010) The application of modular coordination precast concrete core slab in construction industry.
  12. Loke Chin Wei (2010) Comparison between high-percentage replacement of cement with RHA & PFA
  13. Junaidah Jailani (2009) The effectiveness of the Centralized Management Maintenance System (CMMS) as a solution for an effective maintenance and monitoring technique. Case study: Bangunan Pentadbiran Kerajaan Persekutuan Parcel E, Putrajaya. MSc Building Technology.
  14. Suhaila Ali (2009) Perception of highway users towards the management of traffic safety equipment in the maintenance of Plus Highway works, MSc Building Technology.
  15. Ashraf Farag Nouh Ali (2009) Evaluating study to estimating the cracks in building, MSc Building Technology
  16. Muhammad Hazizie bin Mohd Zain (2005), Kesan pembangunan ke atas pencemaran air sungai Kelantan, MSc in Building Technology, USM.
  17. Mohamad Rizal bin Zainon (2005), Kajian ke atas sistem pelupusan sampah “ sanitary landfill” dan impaknya ke atas persekitaran, kajian kes: Tapak Pelupusan Ampang Jajar, Seberang Perai, Pulau Pinang, MSc in Building Technology, USM.
  18. Aymen Ahmad Mohmed Aklan( 2004), Accommodating Campus Building Services for Architectural Aesthetics, MSc in Building Technology, USM.
  19. Zainol Md. Radzi (2003),Ciri-ciri Kekuatan Mampatan dan Pengecutan Konkrit Ringan Berbusa Protein dan Sintetik, MSc in Building Technology, USM.

 Undergraduate Supervision

  1. Kavetha Mohan (2014), Lightweight Foamed Concrete with Palm Oil Fuel Ash (POFA)
  2. Chua Boon Sin  (2014), Appraisal of Fire Risk Management on Water Stilt School Buildings: Case Study of Kampung Pulau Ketam
  3. Intan Mulianie Mohamad Kamil  (2014), The Implementation of OSHA 1994 in Malaysian Construction Industry: Contractors Point of View
  4. Siti Hajar Molah  (2014), Evaluation of Road Maintenance Management System: Case study at Public Work Department of Northeast District, Penang
  5. Siti Norninashakhila Yashrri (2013), SWOT analysis on the implementation of IBS in Malaysia
  6. Fazilah Razak (2013), IBS  risk in construction projects in Malaysia from contractors point of view.
  7. Low Cheau Ming (2012), Defect analysis of different types of walling system for building

 

 

PUBLICATION

Technical Report

  1. Lee Lik  Meng, Nurwati Badarulzaman, Hanizam Awang, Lim Yoke Mui, , Tiun Ling Ta (eds) 2002,   The University in A Garden: Policies and Guidelines, USM, Penang.
  2. Lee Yoke Mui, Lee Lik Meng, Aldrin Abdullah, Hanizam Awang, Nurwati Badarulzaman, 2003, The Participation Process- Planning the USM Main Campus.

 

Books

  1. Hanizam Awang and Md. Azree Othuman Mydin (2016), Construction Method and Tecnology, Penerbit USM.
  2. Lee Lik Meng. Lee Yoke Mui, Muna Hanim Abdul Samad, Hanizam Awang, Mohd. Wira Mohd Shafiei, Azizi Bahaudin, Tiun Ling Ta, Nurwati Badarulzaman, Badaruddin Mohamed, Aldrin Abdullah, 2003, The University in a Garden, Pejabat Penerbit Universiti Sains Malaysia, 176 pages.ISBN.983-2514-50-9
  3. Lee Lik Meng. Lee Yoke Mui, Muna Hanim Abdul Samad, Hanizam Awang, Azizi Bahaudin, Nurwati Badarulzaman, Badaruddin Mohamed, Aldrin Abdullah, 2004, The University in a Garden, Special Edition, Pejabat Penerbit Universiti Sains Malaysia, 183 pages , ISBN:983-2514-81-9
  4. Ahmad Sanusi Hassan, Abdul Majid Ismail, Wan Mariah Wan Harun, Hanizam Awang et al , (2004), Rekabentuk Seni Bina,  Portfolio Tahun 2004, Penerbit Pusat Pengajian PBP,  100 pages, ISBN:983-41749-0-X.

 

Chapter in a Book

  1. Hanizam Awang and Mohammed Zuhear Al-Mulali, (2018), The Inclusion of Palm Oil Ash Biomass Waste in Concrete: A Literature Review, Chapter in Palm Oil, Intech Open,117-132. ISBN 978-1-78923-426-8.
  2. Hanizam Awang and Abd. Naser Abd. Ghani , (2015), Earthworks and Excavation, Chapter  in Construction Methods and Technology, Edited by Hanizam Awang and Md. Azree Othuman Mydin,   USM Publishing, 44 pages.(Accepted-editing stage)
  3. Hanizam Awang (2015), Concrete Formwork Excavation, Chapter  in Construction Methods and Technology, Edited by Hanizam Awang and Md. Azree Othuman Mydin,  USM Publishing, 22 pages (Accepted-editing stage)

 

Journal

  1. Hanizam Awang, Adebayo Adeshina Dauda, Wenny Arminda (2018), Mechanical and Durability Properties of Lightweight Foamed Concrete Containing Palm Kernel Shell. International Journal of Engineering & Technology, 7 (3.9), 65-67 (Scopus)
  2. Wenny Arminda, Hanizam Awang, (2018), Replacing Cement with POFA to Improve the Thermal Properties of Lightweight Foamed Concrete, IOP Conference Series: Materials Science and Engineering, 431, 132004, 1-8. (Scopus)
  3. Kwek Shi Ying, Hanizam Awang, (2018), Artificial Lightweight Aggregate from Palm Oil Fuel ash (POFA) and Water Treatment Waste, IOP Conference Series: Materials Science and Engineering, 431, 082005, 1-8. (Scopus)
  4. Awang, H., Aljoumaily, Z.S. (2017), Influence of Granulated Blast Furnace Slag on Mechanical Properties of Foam Concrete. Cogent Engineering, 4: 1409853, 1-14. (Scopus)
  5. Yusof, N., Awang, H., Iranmanesh, M. (2017), Determinants and outcomes of environmental practices in Malaysian Construction projects, Journal of Cleaner Production, 156, pp. 345-354. (Scopus)
  6. Armida, W. And Awang, H.B. (2017), Preliminary study on the effect of the inclusion of palm oil fuel ash (POFA) in foamed concrete on compressive strength and porosity, ARPN Journal of Engineering and Applied Sciences Open Access, Volume 12, Issue 16, 1 August 2017, Pages 4777-4781 (Scopus)
  7. Hanizam Awang, Mohammed Zuhear Al-Mulali (2017), Properties of Foamed Concrete Incorporating Palm Oil Biomass Ash as a Partial Cement Replacement, International Journal of Advances in Mechanical and Civil Engineering, Vol. 4(5), 89-94.
  8. Hanizam Awang, Mohammed Zuhear Al-Mulali (2016), Utilising Unground Oil Palm Ash in Producing Foamed Concrete and its Application as an Interlocking Mortar-Less Block, World Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectual Engineering, Vol. 10(3), 309-314.
  9. Hanizam Awang, Mohammed Al-mulali, Zaid Aljoumaily (2016), Strength of Sieved Only Oil Palm Ash Foamed Concrete, International Journal of Engineering and Technology, 8(5), 354-357.
  10.  Hanizam Awang, Md Nor Atan, Nazirah Zainul Abidin, Nor”Aini Yusof (2016), A cost –reduction of self-compacting concrete incorporating Raw rice husk ash, Journal of Engineering Science and Technology, 11(1), 096-108, (Indexed by Scopus
  11. Mohammed Al-mulali, Hanizam Awang, H,P.S Khalil, Zaid Aljoumaily, (2015), The incorporation of oil palm ash in concrete as a mean of recycling: A review, Journal of Cement and Composites, 55, 129-138. (IF: 2.76)
  12. Farah, A. H, Hanizam Awang, Muhammed Zuhear Almulali (2015), The effect of oil palm ash incorporation in foamed concrete, Jurnal Teknologi, Vol 75 (5), 63-68. (Indexed by Scopus)
  13. Nuraffefa Hamdan, Hanizam Awang (2015), Safety Scaffolding in the construction site, Jurnal Teknologi, Vol 75 (5), 26-31. (Indexed by Scopus)
  14. Hanizam Awang, Muhammad Hafiz Ahmad, Mohammed Al-mulali, (2015), Influence of Kenaf and Polypropylene Fibres on Mechanical and Durability Properties of Fibre Reinforced Lightweight Foamed Concrete, Journal of Engineering Science and Technology, 10(5), 89-102. (Indexed by Scopus)
  15. Mohammed Al-mulali, Hanizam Awang, Zaid Aljoumaily (2015), Properties of Unground OPA Foamed Concrete, Advances in Environmental Biology, 9(5), 15-17. (Indexed by Scopus).
  16. Ammar W. Abbood, Karam, M. Al-Obaidi, Hanizam Awang, Abdul Malek Abdul Rahman (2015), Achieving energy efficiency through industrialised building system for residential buildings in Iraq, International Journal of Sustainable Built Environment, 4, 78-90. Elsevier.
  17.  Siti Nur Fazillah Mohd Fauzi, Nor’Aini Yusof, Hanizam Awang (2015), Antecedent to Environmental Sustainability Practices in the Engineering Profession, Advances in Environmental Biology, 9(3), 57-60. (Indexed by Scopus).
  18. Nor’Aini Yusof, Mohammad Iranmanesh, Hanizam Awang (2015), Pro-Environment Practices among Malaysian Construction Practitioners, Advances in Environmental Biology, 9(5), 117-119. (Indexed by Scopus).
  19. Hanizam Awang, Mohammed Al-mulali, H,P.S Khalil, Zaid Aljoumaily (2014), Utilisation of Oil Palm Ash in Foamed Concrete, Materials Science, Engineering and Chemistry (MATEC), 15, 01033. (Indexed by Scopus)
  20. Hanizam Awang, Zaid Aljoumaily, Norizal Noordin, Mohammed Al-mulali (2014), The Mechanical Properties of Foamed concrete Containing un-processed Blast Furnace Slag, Materials Science, Engineering and Chemistry (MATEC), 15, 01034. (Indexed by Scopus)
  21. Hanizam Awang, Intan Mulianie Mohamad Kamil, (2014), Execution of the Occupational Safety and Health Act (1994) in the Construction Industry from Contractors’ Point of View, SHS Web of Conferences, 11, 01003. (Indexed by Scopus)
  22. Nur Bahiyah Mohd Shukuri, Hanizam Awang (2014), Study of Abandoned Heritage Buildings from the Owners’ Perspectives in Goerge Town, Penang, MATEC Web of Conferences, 17, 01009. Thompson Reuters
  23. Awang, H. and Ahmad, M.H. (2014). Durability Properties of Foamed Concrete with Fiber Inclusion. International Journal of Civil, Architectural Science and Engineering, 8(3), 32 - 35.
  24. F. Md. Razak, H. Awang (2014),The Contractors’ Perception of the Implementation of Industrialised Building System (IBS) in Malaysia, MATEC Web of Conferences, Vol. 10, 04003, (Indexed by Scopus)
  25. S.N. Yashrri, A. Hanizam (2014), Safety Assessment in Installation of Precast Concrete, MATEC Web of Conferences, Vol . 10, 06001, (Indexed by Scopus)
  26. Hanizam Awang, Md. Azree Othuman Mydin, Muhammad Hafiz Ahmad (2013), Mechanical and Durability Properties of Fibre Lightweight Foamed Concrete, Australian Journal of Basic and Applied Sciences, Vol.7,14-21, Indexed by Elsevier: SCOPUS www.scopus.com and Thomson Reuters.
  27. Ahmad Farhan Roslan, Hanizam Awang , Md Azree Othuman Mydin, (2013), Effects of Various Additives on Drying Shrinkage, Compressive Strength and Flexural Strength of Lightweight Foamed Concrete, Advanced Materials Research Journal, Vol. 626, pp 594-604. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  28. Muhammad Hafiz Ahmad and Hanizam Awang (2013),Effect of Steel and Alkaline-Resistance Glass Fibre on Mechanical and Durability Properties of Lightweight Foamed Concrete, Advanced Materials Research Journal, Vol. 626, pp 404-410, Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  29. Nor’Aini Yusof, Siti Nur Fazillah Mohd Fauzi, Nazirah Zainul Abidin, Hanizam Awang (2013), Journal of Education and Practice, Vol 4(4), 23-29. IC Impact factor value 7.15
  30. Hanizam Awang, Md Azree Othuman Mydin, Ahmad Farhan Roslan (2012) Effect of Additives on Mechanical and Thermal Properties of Lightweight Foamed Concrete. Advances in Applied Science Research Journal, 3(5), pp 3326-3338.
  31. Md Azree Othuman Mydin, Mahyuddin Ramli, Hanizam Awang,(2012) Factors of Deterioration in Building and the Principles of Repair, Analele Universităţii Eftimie Murgu journal, Eftimie Murgu University of Resita, Romania, Volume 19, Issue 1,  pp. 347-354 (ISSN: 1453-7397)
  32. Hanizam  Awang, Md Azree Othuman Mydin  and Ahmad Farhan Roslan (2012), Microstructural investigation of lightweight foamed concrete incorporating various additives, International Journal of Academic Research , Vol.4 (2), pp 196-200.
  33. N. Zainul Abidin, N. Yusof, H. Awang (2012), A foresight into green housing industry in Malaysia, World Academy of Science, Engineering and Technology (Waset) (67), pp 440-448.
  34. Hanizam Awang, Md Azree Othuman Mydin  and Ahmad Farhan (2012). Effect of fibre on drying shrinkage, compressive strength and flexural strength of lightweight foamed concrete, Advanced Materials Research Journal, Vol 587, pp 144-150. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  35. Zaid Shaker Aljoumaily, Norizal Noordin, Hanizam Awang and Mohammed Zuhear Almulali, (2012), The Effect of Blast Furnace Slag on Foam concrete in terms of Compressive strength, Advanced Materials Research Journal, Vol 587, pp 81-87. Indexed by Elsevier: SCOPUS www.scopus.com and Ei Compendex (CPX)
  36. Md Azree Othuman Mydin, Hanizam Awang and  Ahmad Farhan Roslan  (2012), Determination of lightweight foamed concrete thermal properties integrating various additives. Elixir Cement & Con. Com. 48, pp 9286-9291. ICV 5.09. (Indexed by Scopus).
  37. Hanizam Awang, Muhammad Hafiz Ahmad (2012), The Effect of Steel Fibre Inclusion on the Mechanical Properties and Durability of Lightweight Foam Concrete. Elixir Adv. Eng.Info. 48, pp 9348-9351, Publisher: Elsevier, (Indexed by Scopus)
  38. Awang, H. and Wan Badaruzzaman, W.H. (2011). Development of profiled steel sheeting dry board system in school classroom modules. Journal of Civil Engineering and Construction Technologies, Vol. 2(4), pp.72-81.
  39. Atan, M.N, Awang, H. (2011),The compressive and flexural strengths of self-compacting concrete using rice husk ash. Journal of Engineering Science and Technology (JESTEC), Vol 6 (6), pp 720-732. (Indexed by SCOPUS)
  40. Atan, M.N, Awang, H. (2011),The mechanical properties of self-compacting concrete incorporating raw rice husk ash. European Journal of Scientific Research, Vol. 60(1), pp 166-176,  (Indexed by SCOPUS)
  41. Awang, H. and Wan Badaruzzaman, W.H. (2010). Structural performance and application of a reversed profiled steel sheeting dry board (PSSDB) roof panel system, Asian Journal of Civil Engineering. Vol.11, No. 3, pp 371-384, Indexed by Elsevier: (Indexed by Scopus)
  42. Awang, H. and Wan Badaruzzaman, W.H. (2009). The bending behavior of a reversed profiled steel sheet dry board (PSSDB) panel for application in a roofing system. Journal of Construction in Developing Countries, Vol.14, No. 2, pp 21- 36, Indexed by Elsevier: (Indexed by Scopus)

 

 ISI Proceedings

  1. Nor’aini Yusof, Siti Nur Fazillah Mohd Fauzi, Nazirah Zainul Abidin, Hanizam Awang (2013), Employers’ Evaluations on Student Performance in Industrial Training: A Case of Built Environment Students in a Public University in Malaysia, 1st International Conference on Engineering and Technology Education, pp 152-157. Indexed by ISI
  2. N. Zainul Abidin, N. Yusof, H. Awang (2012), A foresight into green housing industry in Malaysia, World Academy of Science, Engineering and Technology (Waset) (67), pp 440-448. Index by Scopus.
  3. Wan Badaruzzaman, W.H., Nordin, N., Hamid, M.F. and Awang, H. (2009). Prediction of the Behaviour of Profiled Steel Sheeting Dry Board through the finite Element. 9th. International Conference on Steel Concrete Composite and Hybrid Structures, 555-560. Indexed by ISI
  4. Noordin, M.N. and Awang, H. (2005). Lightweight foamed concrete in construction, In Proceeding of International Conference of Construction and Real Estate Management (ICCREM), P.R. china: China Architecture & Building Press. P. 1488-1491. ISBN 7-112-07871-7. Indexed by ISI
  5. Ismail, M.R., Ahmad, A.R. & Awang, H. (2003). Structural defects and solutions: A case study of Fort Cornwallis, Penang, Malaysia, In Proceeding of Eighth International Conference on Structural Studies, Repairs and Maintenance Heritage Architecture, pg 349-357. Indexed by ISI

 

National Journal

  1. Awang, H. and Wan Badaruzzaman, W.H. (2010). Finite element prediction on the flexural performance of individual panel of profiled steel sheeting dry board (PSSDB) roof system, Malaysian Construction Research Journal. Vol./No.1, pp 1-12

 

Proceedings 

  1. Nuraffefa Hamdan, Hanizam Awang, (2015), Risk Assessment On Safety Scaffolding In Construction Site, Building Control and Performance Conference 2015, 1-9.
  2. Azira Syafiqa Binti Amir, Hanizam Binti Awang, (2015), The Effects Of Gender Towards Building Defects and Maintenance Cost, Building Control and Performance Conference 2015,34-39.
  3. Leong Kok Tong, Hanizam Awang, (2015), Effect Of Sticky Rice On The Mechanical And Physical Properties Of Lime Mortar, Building Control and Performance Conference 2015 117-122.
  4. Mohamad Naim Mohd Yussof, Hanizam Awang, (2015), Study On The Factors Affecting Government Office Maintenance Cost (Case Study: Bangunan Pentadbiran Kerajaan Persekutuan Parcel C And D, Putrajaya), Building Control and Performance Conference 2015, 123 -130.
  5. Mohammed Al-mulali, Hanizam Awang,  Zaid Aljoumaily (2014), Properties of unground OPA foamed concrete. Postgraduate Conference in Built Environment, Penang.
  6.  Hanizam Awang and Muhammad Hafiz Ahmad (2014), Durability Properties of Foamed Concrete with Fiber Inclusion, International Science Conference, Istanbul, 622-626.
  7. Hanizam Awang, Mohammed Z. Al-Mulali, Zaid Shaker Aljoumaily (2014) Utilization of Oil Palm Ash in Foamed Concrete, Accepted to be presented in International Conference on Civil, Construction and Geological Engineering, Instanbul.
  8. Hanizam Awang, Zaid Shaker Aljoumaily , Norizal Noordin, Mohammed Z. Al-Mulali, (2013), The Mechanical properties of foamed concrete containing un-processed blast furnace slag, 3rd International Building Control Conference, Kuala Lumpur
  9. Hanizam Awang, Mohammed Z. Al-Mulali, H.P.S. Abdul Khalil, Zaid Shaker Aljoumaily, (2013), Utilisation of oil palm ash in foamed concrete, 3rd International Building Control Conference, Kuala Lumpur
  10. Siti Fazillah Mohd Fauzi, NorAini Yusof, Hanizam Awang (2013), Engineers and Environmental Sustainability Practice, International Conference on Business Innovation, Entrepreneurship and Engineering 2013
  11. Hanizam Awang, Md Azree Othuman Mydin  and Ahmad Farhan (2012). Effect of fibre on drying shrinkage, compressive strength and flexural strength of lightweight foamed concrete, International Conference on Civil Engineering & Materials 2012.
  12. Zaid Shaker Aljoumaily, Norizal Noordin, Hanizam Awang and Mohammed Zuhear Almulali, (2012), The Effect of Blast Furnace Slag on Foam concrete in terms of Compressive strength, International Conference on Civil Engineering & Materials 2012.
  13. Md Azree Othuman Mydin and Hanizam Awang (2011), A review on mechanical and thermal properties of lightweight foamed concrete at ambient temperature, Proceeding of International Building and Infrastructure Technology, Penang, pp 400-407.
  14. Hanizam Awang and Md Azree Othuman Mydin, (2011), Properties of gypsum platerboard at elevated temperature, Proceeding of International Building and Infrastructure Technology,  Penang, pp 425-431.
  15. Md Nor Atan and Hanizam Awang, (2011), Investigating the strength of self compacting concrete incorporating low and moderate volume cement replacement using raw rice husk ash, Proceeding of International Building and Infrastructure Technology,  Penang,. Pp 432-439
  16. Ahmad Farhan Roslan, Hanizam Awang and Md. Azree Othuman Mydin (2011), Engineering properties of foamed concrete with different additives as partial cement and sand replacement. Proceeding of 5th. International Conference on Built Environment in Developing Countries 2011, pp 521-530.
  17. Awang, H. and  Abdul Majid, T. (2010). Connector stiffness of profiled steel sheet dry board (PSSDB) system. Proceeding of American Society of Civil Engineering (ASCE) 6th. International Engineering & Construction Conference (IECC’6), pp. 72-79.
  18. Awang, H., Noordin, M.N., Ismail, M.R., Hussein Al-Haidary, M.H.M (2010) Properties of Hardened foam concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 1013-1021.
  19. Atan, M.N, Awang, H. (2010),The compressive and flexural strengths of self-compacting concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 876-885.
  20. Mohamad Jais, M.H.S, Awang, H. (2010) The effects of mineral additives on the strength of fibre foamed concrete. Proceeding of 4th. International Conference on Built Environment in Developing Countries 2010. pp 955-963.
  21. Md. Nor Atan, Hanizam Awang (2010), Influence of powder fractions on the properties of self-compacting concrete, Proceeding of World Engineering Congress 2010
  22. Md. Hasif Shafiq Mohamad Jais, Hanizam Awang (2010), The effects of mineral additives in fiber foamed concrete, Proceeding of World Engineering Congress 2010.
  23. Nordin, N., Wan Badaruzzaman, W.H. and Awang, H., (2009). Connector stiffness of ‘peva-cemboard’ screwed connection in profiled steel sheet dry board (PSSDB) panel. Fifth International Conference on Construction in the 21st Century (CITC-V), Turkey.  ISBN:1-884342-02-3, pp 1476-1482
  24. Wan Badaruzzaman, W.H., Awang, H., and Nordin, N., (2009). Development of a new composite flooring system based on improved profiled steel sheet dry board (PSSDB) system. Fifth International Conference on Construction in the 21st Century (CITC-V), Turkey. ISBN:1-884342-02-3, pp1563-1570
  25. Awang, H., Nordin, N., Wan Badaruzzaman, W.H., (2009). Development of a new composite rooring panel based on profiled steel sheet dry board system. International Symposium on Construction in Developing Economies: Commonalities Among Diversities, Penang. ISBN:978-967-5417-34-4. Pp 210-217
  26. Nordin, N., Wan Badaruzzaman, W.H., Awang, H. (2009). Performance of Profiled Steel Sheet Dry Board Flooring System with Timber Strips. International Symposium on Construction in Developing Economies: Commonalities Among Diversities, Penang. ISBN:978-967-5417-34-4. pp 394-401.
  27. Awang, H, Wan Badaruzzaman, W.H. and Nordin, N., (2009). The Application of Profiled Steel Sheeting Dry Board (PSSDB) Industrialised Building System. 7th. Asia Pasific Structural Engineering and Construction Conference 2009 (APSEC 2009).
  28. Awang, H., Nordin, N. and Wan Badaruzzaman, W.H. (2008). Complete application of profiled steel sheet dry board system as classroom modules. 2nd. International Conference on Built Environment in Developing Country, Penang, pp 432-443
  29. Awang, H. and Wan Badaruzzaman, W.H. (2008). Behaviour of individual panel of profiled steel sheet dry board roof system CAFEO, Bangkok.
  30. Awang, H. and Wan Badaruzzaman, W.H. (2007). Development of profiled steel sheet dry board (PSSDB) roofing system, In Proceeding of International Conference on Built Environment in Developing Country, Penang, pp 484-493
  31. Wan Badaruzzaman, W.H., Awang, H., and Ahmed, E. (2006). Development of folded plate profiled steel sheet dry board (PSSDB) roofing system, Proceeding of 6th Asia Pasific Structural Engineering and Construction Conference (APSEC), Kuala Lumpur.
  32. Noordin, M.N., Awang, H. and Abdul Ghani, A.N.A., (2006). Practical application of portable foam generator and lightweight foamed concrete in housing development, In Proceeding of The International Conference on Sustainable Housing, Penang: USM. ISBN 983-41749-1-8, pp 223-230
  33. Awang, H. Ahmad, A.G. and Ismail, M.R. (2003). Do we need to teach Construction History? Experiences of the School of Housing, Building and Planning, Universiti Sains Malaysia, Penang, In Proceeding of the First International Congress on Construction History, Madrid. ISBN 84-9728-072-5- pp 291-298
  34. Awang, H. & Noordin, N. (2002).  Effect  of Alkaline-Resistant Glass Fibre on Compressive Strength of Lightweight Foamed Concrete, In Proceeding of the 27th Conference on Our Would in Concrete and Structures, Singapore, page 225-230. ISBN 981-04-5825-8.
  35. Awang, H. & Noordin, N. (2002). Lightweight Foamed Concrete Containing Alkaline-Resistant Glass Fibre,  In Proceeding of the 6th International Conference on Concrete Technology for Developing Countries, Jordan, 21 - 23 October.
  36. Mohd Fadzil Mohd Idris and Hanizam Awang (2002), Performance Based For Smoke Detectors On Pitch And Flat Roof, Proceedings of the 2nd World Engineering Congress, Kuching, pp. 377-383.

 

Teaching Modules

  1. Managing People in Construction Industry (2012), Module prepared for Construction Industry and Development Board (CIDB) Training
  2. Concrete work management (2012), Module prepared for Construction Industry and Development Board (CIDB) Training
  3. Building works Supervision (2012), Module prepared for Construction Industry and Development Board (CIDB) Training

 

Report

  1. Lee Lik  Meng, Nurwati Badarulzaman, Hanizam Awang, Lim Yoke Mui, , Tiun Ling Ta (2002),   The University in A Garden: Policies and Guidelines, USM, Penang.
  2. Lee Lik Meng, Lim Yoke Mui, Aldrin Abdullah, Hanizam Awang, Nurwati Badarulzaman, (2003), The Participation Process- Planning the USM Main Campus.
  3. Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2002), Proposed Landscape & Pedestrianization: Sungai Dua Entrance.
  4. Aldrin Abdullah, Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2002), Universiti Sains Malaysia: The Walkable Campus Plan
  5. Aldrin Abdullah, Lee Lik Meng, Badaruddin Mohamed, Hanizam Awang, Nurwati Badarulzaman, Lim Yoke Mui, Tiun Ling Ta (2003), Universiti Sains Malaysia: The Walkable Campus Plan

 

 

 

Architectural Science Review December 2003
Building and Environment June 2004

OTHERS

ACADEMIC RECOGNITION AND LEADERSHIP

  • Reviewing Book
1. Understanding Building failures and Limit state design (2011) by Ir. Dr. Mohd Zaid Yusof
  • Editing of Books
  1. Ahmad Sanusi Hassan, Abdul Majid Ismail, Wan Mariah Wan Harun, Hanizam Awang et al , (2004), Rekabentuk Seni Bina,  Portfolio Tahun 2004, Penerbit Pusat Pengajian PBP,  100 pages, ISBN:983-41749-0-X
  2. Lee Lik  Meng, Nurwati Badarulzaman, Hanizam Awang, Lim Yoke Mui, , Tiun Ling Ta, (2002),   The University in A Garden: Policies and Guidelines, USM, Penang.
  3. Scientific reviewers of 2nd Internertional Conference on Built Environment in Developing Countries, 2008
  4. Review board, 3rd International conference on Built Environment in Developing Countries, 2009.
  5. Review board, 4th International conference on Built Environment in Developing Countries, 20010.
  6. Review board, 5th International conference on Built Environment in Developing Countries, 2011
  • Reviewing Articles
  1. Journal of Construction in Developing Countries (JCDC), (2018), Contribution for efficient formulation of concrete in informal sectors and semi-informal construction. Scopus
  2. Journal of Construction in Developing Countries (JCDC), (2018), Cost Effective Thermal Insulating Building Materials. Scopus
  3. Advances in Concrete Construction, An International Journal (2018), Mechanical Properties of Lightweight Foamed Concrete with steel and polypropylene fibers. Techno-Press.
  4. Advances in Concrete Construction, An International Journal (2018), Effect of types of aggregate on the mechanical properties of foamed concrete. Techno-Press.
  5. Journal of Engineering Science and Technology (JESTEC), (2018), Strength and Durability Characteristics of Basalt Fiber Reinforced Concrete.  Scopus
  6.  International Conference Geotechnique, Construction Materials and Environment (Geomate) (2018), Community Empowerment In Planting Vegetation To Reduce Coastal Abrasion In West Sumatra
  7. International Conference Geotechnique, Construction Materials and Environment (Geomate) (2018), Assessment of quality of different aggregates for road construction in the central division of Fiji
  8. International Conference Geotechnique, Construction Materials and Environment (Geomate) (2018), Prediction of Sinkhole Collapse.
  9. International Conference Geotechnique, Construction Materials and Environment (Geomate) (2018), Topographic Control on Grounwater Flow in central of Hard Water Area, West Progo Hills, Indonesia.
  10.  International Conference Science, Engineering & Environment (SEE)(2018), Effect Of 17a-Methyltestosterone On Sex Reversal Of Red Tilapia(Oreochromis Niloticus X Oreochromis Mossambicus) In Free-Swimming Stage
  11.  Internation Conference Science, Engineering & Environment (SEE)(2018), Assessment of out of plane failure of non engineered masonry wall due to typoon Haiyan induced storm surges
  12.  Advances in Concrete Construction, An International Journal (2017), Effect different aspect ratio and hybrid steel fibre on lightweight foamed concrete
  13. Journal of Engineering, Design and Technology (2017), Comparative Process-based Life Cycle Assessment of Bioconcrete and Conventional concrete, Scopus
  14. Journal of Construction in Developing Countries (JCDC), (2016), Construction Considerations for low cost earth bricks shells. Scopus
  15. Journal of Construction in Developing Countries (JCDC), (2016), Production and quality levels of construction materials in Andean Regions: A case study of Chimborazo, Ecuador. Scopus
  16. Journal of Engineering Science and Technology (JESTEC), (2016), Phyco-Mechanical characteristics of cement-bonded kenaf bast fibres composite boards with different densities, Scopus
  17. Journal of Construction in Developing Countries (JCDC), (2015), Mechanical Properties of normal-strength Concrete with Local Cements and Aggregates in Pakistan. Scopus
  18. Journal of Construction in Developing Countries (JCDC), (2015), Finite Element Modelling of Cyclic Behaviour of Cold-Formed Bolted Moment Resisting Connectors, Scopus.
  19.  Reviewer of articles for the eco-AICCE 15 (2015) , The Effect of Chemical Solution to the Sustainability of Composite Fired Clay Bricks. Scopus Index
  20.  Reviewer of articles for the eco-AICCE 15 (2015) , Drying Shrinkage of Fly Ash Mortar Mixed with Seawater,. Scopus Index
  21.  Reviewer of articles for the eco-AICCE 15 (2015) , Mechanical Properties of Mortar with Cement Treated Tyre Crumb and Oil Palm Fruit Fibre. Scopus Index
  22.  Reviewer of articles for the eco-AICCE 15 (2015) , Strength Development in Cement Admixed Fine-Grained Dredged Marine Soils. Scopus Index
  23. Journal of Construction in Developing Countriues( JCDC) (2014), Evaluation of Coal Fly Ash Performance in High Strength Concrete, Scopus
  24. Journal of Construction in Developing Countriues (JCDC), (2014), Traditional Construction of Mud Houses Using Indigenous Gadhi Soil, Scopus
  25.  25. Journal of Construction in Developing Countriues (JCDC),  (2014), Experimental Investigation on Recycled Coarse Aggregate and Its Effects on Fresh and Hardened Concrete Properties, Scopus
  26. Journal of Construction in Developing Countriues (JCDC), (2014), Effect of Cement Quality on Construction of Biosand Filters in remote Communities Around the World. Scopus
  27. Reviewer of articles for International Conference On Science Engineering (ICSEBS),  (2014), Exploring an Alternative Grey Water Treatment System in the National University of Malaysia Mosque. ISI and Scopus Index
  28. Reviewer of articles for International Conference On Science Engineering (ICSEBS),  (2014), Flat Roof Defect : Preliminary Condition Survey for water Ponding Monitoring, ISI and Scopus Index
  29. Reviewer of articles for International Conference On Science Engineering (ICSEBS),  (2014),  Issues in the Heritage Buildings Conservation of Shophouses in Kuala Lumpur Chinatown. ISI and Scopus Index.
  30. Reviewer of articles for International Civil and Infrastructure Engineering Conference (INCIEC), (2014), Hydration Kinetics and Strength Development of WPSA with Different Particle Size as Binary Blended Cement. Thompson Reuters.
  31. Reviewer of articles for Reviewer of articles for International Civil and Infrastructure Engineering Conference (INCIEC), (2014), Enhancement Performance of Recycled Concrete by Using Micronized Biomass Silica. Thompson Reuters.
  32. Reviewer of articles for Reviewer of articles for International Civil and Infrastructure Engineering Conference (INCIEC), (2014), An Experiment Study on Fracture Energy of Foamed Concrete, Thompson Reuters.
  33. Reviewer of articles for Reviewer of articles for International Civil and Infrastructure Engineering Conference (INCIEC), (2014), Compressive Strength and Water Absorption Characteristics of Brick Using Quarry Dust. Thompson Reuters.
  34. Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), The Effect Of Hydrothermal Treatment On The Mechanical And Durability Properties Of Fly Ash Cement Blended Mortars.
  35.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), Classification Of Factors Contributing To Roof Leaking Focusing On Clay Tile Roof And Asbestos Roof On Malaysia Heritage Buildings.
  36.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), Antecedent To Environmental Sustainability Practices In The Engineering Profession.
  37.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), Choosing Right Waterproofing Materials In Preventing Roof Leaking: Comparing Selected Malaysia and Uk Cases.
  38.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), A Review of Study on Technology Readiness for Industrialised Building System (IBS).
  39.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), Analysis of Firm Financial Performance Models in Construction Industry.
  40.  Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), The Adoption Of Flexibility Mechanism in The Creation of Simple Interior Space.
  41. Reviewer of articles for Postgraduate Conference in Built Environment (PGCBE), (2014), The Effect Of Curing Environment On Oil Palm Shell Lightweight Concrete On Mechanical Properties and Thermal Conductivity.
  42.  Reviewer of articles for 4th International Graduate Conference on Engineering, Science and Hunanities (IGCESH 2013), Comparison between termination clauses in PWD 203A(Rev.2010) of Malaysia and GTC of Iran
  43. Reviewer of articles for 4th International Graduate Conference on Engineering, Science and Hunanities (IGCESH 2013), Post-Earthquake Reconstruction of Traditional Earthen Houses in Historic City of Bam
  44. Journal of Construction in Developing Countries (JCDC) (2013). The use of Local Building Materials for Housing Provision, Scopus
  45.  Journal of Construction in Developing Countries (JCDC) (2013). Effect of Ambient temperature and wind speed on properties of rice husk ask(RHA) concrete, Scopus
  46. Journal of Construction in Developing Countries (JCDC) (2013). Experimental Investigation on Recycled Coarse Aggregate and Its Effect on Fresh and Hardened Concrete Properties, Scopus.
  47. Journal of Scientific Research and Reports (2013), The properties of fiber reinforced gypsum plaster
  48. Journal of Construction in Developing Countriues JCDC Journal (2013), Quality Assessment of Blocks in Ibadan. Scopus
  49. Journal of Engineering and Technology (2011). Evaluation of natural frequency and damping for profiled steel sheet dry board composite panel. Scopus
  50. Journal of Construction in Developing Countriues (JCDC),  (2010) Properties of Self-Consolidating Concrete Produced Using Local Algerian materials. Scopus
  51. Review of articles for 5th. International Conference and Workshop on Built Environment in Developing Countries 2011, Mechanical and structural behavior of concrete shell using palm fiber as roof application.
  52. Pertanika Journal (2010), Durability of foam concrete design for housing construction

  • Technical Assessor/ Panel Reviewer/ Scientific Committee
  1. Review Panel for Research University (RUI) (2016)
  2. Scientific and Technical Committee & Editorial Review Board on Materials and Metallurgical Engineering, (2015), WASET.
  3. Perlantikan sebagai pakar rujuk laporan penambahbaikan dan penstrukturan semula program Sarjana Muda sains (Perumahan, Bangunan dan Perancangan (Rekabentuk Dalaman) kepada Senibina Dalaman untuk sessi 4 tahun.(2013)
  4. Review post graduate proposal (2012), Post Graduate Seminar Dec. 2012.
  5. Scientific Commitee for International Building and Infrastructure technology Conference 2011 (BITECH)
  6. Review panel for abstract for 2nd Symposium of USM Fellowship 2011
  7. Review panel for abstract for 4th. International Conference on Built Environment in Developing Countries 2010
  8. Review panel for abstract for 3rd International Conference on Built Environment in Developing Countries (2009)
  9. Scientific Commitee for  2nd International Conference on Built Environment in Developing Countries 2008
  10. Review Panel Postgraduate research Grant Scheme (USM-PRGS) (2009) ke -3
  11. Review Panel Postgraduate research Grant Scheme (USM-PRGS) (2009) ke -4
  12. Review Panel Postgraduate research Grant Scheme (USM-PRGS) (2010) ke -8
  13. Review Panel Postgraduate research Grant Scheme (USM-PRGS) (2011) ke -9 & 10
  14. Review panel Postgraduate research Grant Scheme (USM-PRGS) (2011)- Nooriati Taib
  15. Review panel Postgraduate research Grant Scheme (USM-PRGS) (2012) ke -11 & 12
  16. Review panel Postgraduate research Grant Scheme (USM-PRGS)(2012) ke -13
 
 
  • Editorial Board
1. Editor, Book of Construction Methods and Technology (2016),  Penerbit USM
2. Review Board for  3rd. International Conference on Built Environment in Developing Countries 2011
3. Editor for 5th. International Conference and Workshop on Built Environment in Developing Countries 2011
4. Review Board  for  5th. International Conference on Built Environment in Developing Countries 2010
5. Review Board  for  4th. International Conference on Built Environment in Developing Countries 2009
       • Examiner
 
   External Examiner
  1. MSc. Thesis, Alsad bin Nasrullah (2016), Experimental Study Of Fracture Energy For Foamed Concrete, Universiti Tun Hussein Onn.

   Internal Examiner

  1. PhD Thesis, Mustaqqim Abdul Rahim (2018), Galvanised Steel Iron (GI) as Lightning Down Conductor Cable.
  2. MSc. Thesis, Tiong Ling Ling (2018), High Performance Concrete Containing Large Volume of Ground Granulated Blast Furnace Slag and Pulverised Fly ash with Polycarboxylates Superplasticizer.
  3. MSc. Thesis, Bob Harris Norbert (2017), The Utilization of Rice Husk ash and Ground Granulated Blast Furnace slag as Cement Replacament for the fabrication of Ternanry Blended Cement Concrete.
  4. MSc. Thesis, Chung Kok Yaw (2015), The Durability Performance, Mechanical Strength and Dimensional Stability of Coal Ash Hybrid Geopolymer Composite, Thesis upgrading from MSc to PhD.
  5. MSc. Thesis, Muhammed Zuhaer  (2011), Studies of the performance of a newly designed armour unit for rubble mound breakwaters (Viva on 28 Sept 2011)
  6. MSc. Thesis, Alonge Olyiwola Richard (2011), Development of Sustainable sandwich ferrocement concrete panel for structural applications, Thesis upgrading from MSc to PhD
  7. MSc. Thesis, Wari A/L Kiew (2010), Kemalangan jalanraya daripada perspektif perancangan fizikal. Kajian kes: km 21 dan km 31, jalan Persekutuan, daerah Seberang Perai Selatan, Pulau Pinang. (Viva on 14 Feb 2011)
  8.  MSc. Thesis, Nordin bin Manan (2010), Decreasing the number of road accidents based from the Engineering perspective: At Scotland road, Timur laut District, Penang 

 

  • MSc Research Project by Coursework
  1. Shamsinar Abdul Razak (2013), Building Maintenance at Vocational Schools in Penang.
  2. Sangita Ramalingam (2012) Foamed concrete building envolope: A case study on internal temperature of swiftlet house
  3. Low Soo Yin (2011), The implementation of quality systems in analysis of the workmanship performance of building construction
  4. Monir hazim Mohammed Hussein Al-Haidary (2010), Shrinkage in lightweight foamed concrete
  5. Noor syakira binti A. Rahman (2010), A study on performance of compressive strength of fly ash cements bricks.
  6. Nur Ramziyah binti Muhamad Halil (2010), Technology transfer in Industrialised Building System (IBS)
  7. Ashraf farag Nough Ali (2009) Evaluation study of concrete cracks for existing building and various techniques of concrete cracks monitoring.
  8. Mohamad Rizal zainon (2005), Kajian keatas sistem pelupusan sampah “sanitary landfill” dan impaknya ke atas persekitaran, kajian kes: tapak pelupusan Ampang Jajar, Seberang Perai, Pulau Pinang
  9. Muhammad Hazizie Mohd Zain (2005), Kesan pembangunan ke atas pencemaran air sungai di negeri Kelantan.

 

 

  • CONTRIBUTION TO SCHOOL/USM
1. Commitee member of KPI and KIP, School of Housing, Building and Planning, (2013-2015).
2. Commitee member of Postgraduates Study, School of Housing, Building and Planning, (2013-2015).
3. Commitee member of Student Development and Industry, School of Housing, Building and Planning, (2013-2015).
4. Commitee member of Strategic Planning Workshop on Industry & Community Engagement, School of Housing, Building and Planning, (2014)
5. Commitee member of HBP Road Map, School of Housing, Building and Planning, (2013).
6. Committee Member of Pembangunan Pelajar dan jaringan (JK PPJ) Pusat Pengajian PBP (1st Jan -31 Dec  2013)
7. Committee Member of Pengajian Siswazah Pusat Pengajian PBP (1st Jan -31 Dec  2013)
8. Committee member of ‘Jadual Waktu dan Dewan Kuliah, Pusat  Pengajian PBP, 1 August 2011 – 31 December 2012
9. Committee of Seminar Perumahan 2012, Jabatan Perumahan Negara, Kementerian Perumahan dan Kerajaan Tempatan
10. Appointment as interview panel for Local students new intake 2012 / 2013, 3 May 2012
11. Committee member of  Ahli jawatankuasa pemilihan calon Anugerah pendidik cemerlang, Aug 2011- Dec 2012
12. Appointment as interview panel for international students new intake 2011 / 2012, 13 June 2011
13. Appointment as a member of Local Knowledge Research Program (Ahli Keakrifan Tempatan Alam Bina), 4 Jan 2011
14. Committee member of International Conference on Built Environment in Developing Countries 2011
15. Appointment as Committee member Perundingan dan Penyediaan Modul Latihan, 2011
16. Committee member of ‘Penilaian and Pelantikan Jawatan Professor Kunjungan / Pensyarah Kunjungan dari ‘Post-Doctoral’ Pusat  Pengajian PBP, 13 May 2010
17. Committee member of International Conference on Built Environment in Developing Countries 2010
18. Appointment as interview panel for Student Exchange, 8 Mac 2010
19. Appointment as interview panel for Programme’s new intake (Saluran kedua)  2010 / 2011, 3 Mac 2010
20. Appointment as interview panel for international students new intake 2010 / 2011, 22 November 2010
21. Committee member of Ahli Jawatankuasa Makmal Tanah dan   Ukur Satah, 2009-2010
22. Appointment as interview panel for School of Housing, Building and Planning (Building Technology) students new intake 2009 / 2010, 12 May 2009
23. Committee member of Post Graduate Research Colloquium 2009.
24. Committee member of  Ahli jawatankuasa pemilihan calon Anugerah pendidik cemerlang, 2009-2010
25. Committee member of International Conference on Built Environment in Developing Countries 2009, 25 Feb 2009 – 31 Dec 2009
26. Committee member of International Conference on Built Environment in Developing Countries 2008, 1 Mac 2008 – 31 Dec 2008
27. Committee member of Buletin PBP (2004)
28. Committee member Profesorial Talk, Perlantikan profesor, Profesor Ir. Dr. Mahyuddin Ramli, 2002.
29. Committee Member of Perundingan dan Penyediaan Modul Latihan School of Housing Building and Planning, 2001
  •  CONTRIBUTION TO SOCIETIES
• Board of Director, Koperasi Tadika Minden, 2002 – present
• Hakim Pertandingan Lukisan Kejuruteraan Peringkat Negeri Kedah, 13-16 Jun, 2004.
 
  • Working Experience
  1. Industrial training with HSS Integrated Sdn. Bhd., Damansara Utama, as a designer. (1993)
  2. Design engineer with Jurutera Perunding Sdn. Bhd., Kota Bharu. (1994)
  3. Site engineer with Sykt. Sulaiman Daud Sdn. Bhd., Kota Bharu. (1994-1996)
  4. Part-time lecturer with Adorna Institute of Technology (1999)
  5. Project manager with PTSB Sdn.Bhd, Penang (July 1999-April 2001)
  6. Lecturer, School of Housing, Building and Planning, Universiti Sains Malaysia, April 2001-present

 

 

 
  • Hits: 19676
USM WEBSITE
CAMPUSONLINE
E-LEARN USM
HBP FACEBOOK
HBP INSTAGRAM
HBP TWITTER
USM E-MAIL
HBP YOUTUBE

School of Housing, Building and Planning,  Universiti Sains Malaysia, 11800 USM, Pulau Pinang Malaysia
Tel : +604-653 3173 / 2752 | Fax : +604-657 6523 | Emel : hbp@usm.my  Admin

All Rights Reserved